Construction of hangars
Prefabricated frameless arched ANGAR - a universal type of building that is used as a warehouse, garage, terminal, etc. Width up to 18 meters and height up to 9 meters allow it to be used also as part of a sports, exhibition or trade complex or as a shelter for large-sized equipment. Modern technology provides an opportunity in a short time to produce and mount a covered arched structure of a large area. The hangar is manufactured on site. The duration of construction of a 1000 m2 building is two to three weeks. The low weight of the design allows you to do without a powerful expensive foundation, which significantly speeds up the work. The folded joints of the sections make it sealed, thereby reducing the cost of heating the room. The prefabricated hangar is earthquake-proof, withstands high wind and snow loads. At the end of construction, finishing work is not required, as well as repair work every three years. Due to all this, the cost of the hangar is much lower compared to the other technologies of building construction. Do you urgently need storage or production facilities? For you, prefabricated hangars of galvanized steel sheet. Order a warehouse, a garage, a vegetable store, a refrigerator, a parking lot, a stadium (court), a market, a parking lot, or an attic floor. You get the following advantages:
RELIABILITY-The constructed building will serve you for a long time: it has the properties of a monolithic structure, fireproof and durable, like steel.
SPEED mounting. A brigade of eight people will build a hangar with an area of 1000 sq.m. For two - three weeks.
ECONOMY of means due to easy foundation, low metal consumption, absence of heavy equipment during installation.
ORIGINALITY-of the architectural solution. This allows you to build structures with a large useful area, with clean and aesthetic external and internal surfaces, convenient for operation, versatile. Self-supporting arches cover spans of up to 20 meters wide without any intermediate columns, beams or trusses. This allows you to maximize the useful area of the building.
The hangar can be insulated with glass wool. (Excellent sound absorption, does not load design, excellent aesthetic appearance);
POLYURETHANE (low thermal conductivity, tightness, adhesion to any surface);
MINATOIL-(not deformed, high service life, incombustibility, vapor permeability, hydrophobicity), or other material at the request of the customer.
Warming-The loss of heat through the outer walls is up to 50% of the total heat loss. A rational and effective way to reduce heat losses, and thus reduce the cost of heating, is the insulation of external walls with thermal insulation products that have a resistance to thermal conductivity 10 times higher than materials traditionally used in construction (brick, concrete). Inthis case, the load-bearing structures of the building will be protected from freezing, which will increase their service life. Due to the absence of temperature fluctuations and noise reduction in the room, a comfortable microclimate is created. * Glass wool (glass wool) is made mainly from recycled glass, sand, soda and limestone. Glass wool is a fibrous insulating material. Its good insulating ability is based on static air, covered with fibers. The thermal conductivity of glass wool is very low. Thanks to its open design, glass wool gives the best known sound absorption so far. Glass wool is resistant to aging, does not deform and retains thermal insulation properties for many years. The valuable quality of Mineral Wool is the structure of the material - the finest fibers in the products are randomly distributed in horizontal and vertical directions, at different angles to each other. Due to this arrangement, the fibers are tightly intertwined with each other, providing high rigidity of the products and high resistance to mechanical influences. Therefore, heat-insulating slabs are not deformed over the years, the material does not compact and the thickness of the thermal insulation layer does not decrease. High heat-shielding characteristics of the material are preserved during long-term operation. The structure of the fibers of mineral wool also provides soundproofing properties, which are not worsened by the passage of time.